Add your own port

You can add your own port or range of ports. You'll find details of the ports to open:

Once you know which ports to use:

  1. Click to tick the Enable option in the first available field
  2. In the Trigger Port field, enter the outgoing port associated with the application
  3. In the Trigger Type field, select either TCP or UDP
  4. In the public ports field, enter the incoming port(s) that will be opened when the trigger port is activated
  5. You can enter a single public port, multiple ports separated by a comma (,) or a range of ports using a dash (-)
  6. In the public type, select either TCP or UDP

  7. Scroll to the bottom of the page and select SAVE SETTINGS 

  8. Your Port Trigger will be saved


Delete a rule

To delete a rule, simply:

  1. Click to tick the Delete box next to the rule(s) you no longer require
  2. Click DELETE and then SAVE SETTINGS

  3. The rule will be deleted

Last updated: 11/2/2019
Simon H posted this. Got a comment? Good or bad, we'd be pleased to hear from you.
Was this article helpful?
How can we improve this article?
  • Please select a reason
  • The article didn't answer my question
  • The article is missing important information
  • I didn't understand the article
  • I found the information but it didn't resolve my issue
  • Please let us know how we can make it better

Thanks for your feedback

Thanks for your feedback

We'll use your feedback to keep improving our help articles