Add your own ports

You can add your own port or range of ports. You'll find details of the ports to open in the instructions or support site of your application or online game

Once you know which ports to forward:

  1. Tick Enable in the first available field (i.e. No 1)
  2. Enter the IP address of the computer that you want to port forward to
  3. In the example below we reserved the IP address so have entered 17
  4. Select the protocol type i.e. TCPUDP or TCP & UDP
  5. Enter the Private Ports (or LAN) e.g. 3074 ~ 3074 for one port, or 27014 ~ 27050 for a range or ports
  6. Enter the Public Port - in most cases the value for the Private and Public port are the same

  7. Enter details of any additional ports you want to forward

  9. Your new rules will be applied


Delete a rule

To delete a rule, simply:

  1. Click to tick the Delete box next to the rule(s) you no longer require
  2. Click DELETE and then SAVE SETTINGS

  3. The rule will be deleted

Last updated: 12/2/2019
Simon H posted this. Got a comment? Good or bad, we'd be pleased to hear from you.
Was this article helpful?
How can we improve this article?
  • Please select a reason
  • The article didn't answer my question
  • The article is missing important information
  • I didn't understand the article
  • I found the information but it didn't resolve my issue
  • Please let us know how we can make it better

Thanks for your feedback

Thanks for your feedback

We'll use your feedback to keep improving our help articles