Connecting your wireless device using PBC

To connect usingĀ Push Button Configuration (PBC):

Make sure that you know how to start WPS on your wireless device before you start.

  1. Briefly press the WPS button on your Technicolor TG589 router.



  2. The WPS LED starts blinking orange. This indicates that your router is now searching for wireless clients that are in registration mode. You now have two minutes to start WPS on your wireless client.
  3. Start WPS PBC on your wireless client.
  4. Your router provides its wireless settings to the wireless client.
  5. At the end of the WPS process, the status of the WPS LED on your router will change to either of the following:
    • Solid green
      This indicates that you successfully registered and connected this wireless client. You are now connected to your router wireless network.
    • Blinking red
      This indicates that your Technicolor TG589 router could not find any wireless client in WPS pairing mode or that the exchange of the wireless settings and/or registration failed.
Last updated: 14/2/2019
Simon H posted this. Got a comment? Good or bad, we'd be pleased to hear from you.
Was this article helpful?
How can we improve this article?
    >
  • Please select a reason
  • The article didn't answer my question
  • The article is missing important information
  • I didn't understand the article
  • I found the information but it didn't resolve my issue
  • Please let us know how we can make it better
0/600
Great!

Thanks for your feedback

Thanks for your feedback

We'll use your feedback to keep improving our help articles