WPA-Enterprise encryption

Please note: a RADIUS server must be readily set up on your local network to set up WPA-Enterprise encryption.

Follow these steps:

  1. Browse to the Technicolor TG589 router web interface.
  2. Choose Wireless. The Wireless page appears.
  3. On the left menu, select the access point that you want to configure.
  4. In the Security Mode list under Access Point, select one of the following modes:
    • WPA2
    • WPA+WPA2
  5. The following RADIUS settings are now available for configuration:
    • RADIUS Authentication Server's IP: enter the IP address of your RADIUS server.
    • RADIUS Authentication Server's port: enter the WPA RADIUS Port.
    • RADIUS Authentication Server's secret: enter the WPA RADIUS Key.
  6. Select Save to apply your changes.
  7. Reconnect your wireless client(s) to your Technicolor TG589 router.
Last updated: 14/2/2019
Simon H posted this. Got a comment? Good or bad, we'd be pleased to hear from you.
Was this article helpful?
How can we improve this article?
    >
  • Please select a reason
  • The article didn't answer my question
  • The article is missing important information
  • I didn't understand the article
  • I found the information but it didn't resolve my issue
  • Please let us know how we can make it better
0/600
Great!

Thanks for your feedback

Thanks for your feedback

We'll use your feedback to keep improving our help articles