Set up picture messaging

Follow these instructions to set up a GPRS data connection for picture messaging.

1. Find Personal config. sett.

  • Press the Navigation key to access the main menu
  • Scroll to Settings and press the Navigation key
  • Scroll to Configuration and press the Navigation key
  • Scroll to Personal config. sett. and press the Navigation key

2. Create new or edit existing data connection

  • If no data connections have been created:
    • Press the Navigation key
    • Scroll to Multimedia msg. and press the Navigation key
  • If data connections have been created already:
    • Press Options
    • Scroll to Add new and press the Navigation key
    • Scroll to Multimedia msg. and press the Navigation key
  • If you want to edit an existing data connection:
    • Highlight the required data connection and press the Navigation key

3. Enter name

  • Scroll to Account name and press the Navigation key
  • Key in Picture Message and press the Navigation key

4. Enter picture messaging server

  • Scroll to Server address and press the Navigation key
  • Key in http://mms and press the Navigation key

5. Deactivate preferred access point

  • Highlight Use pref. access pt. and press the Navigation key
  • Highlight No and press the Navigation key
  • If required, press the Navigation key to accept

6. Enable proxy

  • Scroll to Access point settings and press the Navigation key
  • Scroll to Proxy and press the Navigation key
  • Highlight Enable and press the Navigation key

7. Enter IP address

  • Highlight Proxy address and press the Navigation key
  • Key in 149.254.201.135 and press the Navigation key

8. Enter port

  • Scroll to Proxy port and press the Navigation key
  • Key in 8080 and press the Navigation key

9. Begin editing bearer settings

  • Scroll to Bearer settings and press the Navigation key

10. Enter APN name

  • Scroll to Packet data acc. pt. and press the Navigation key
  • Press Clear to clear the input field
  • Key in eezone and press the Navigation key

11. Select network type

  • Scroll to Network type and press the Navigation key
  • Highlight IPv4 or IPv6 and press the Navigation key

12. Select authentication type

  • Scroll to Authentication type and press the Navigation key
  • Highlight Normal and press the Navigation key

13. Enter username

  • Scroll to User name and press the Navigation key
  • Key in eesecure and press the Navigation key

14. Enter password

  • Scroll to Password and press the Navigation key
  • Key in one2one and press the Navigation key
  • Key in one2one again and press the Navigation key to confirm

15. Save and exit

  • Press Disconnect to save the settings and return to stand-by mode
Last updated: 26/3/2019
Simon H posted this. Got a comment? Good or bad, we'd be pleased to hear from you.
Was this article helpful?
How can we improve this article?
    >
  • Please select a reason
  • The article didn't answer my question
  • The article is missing important information
  • I didn't understand the article
  • I found the information but it didn't resolve my issue
  • Please let us know how we can make it better
0/600
Great!

Thanks for your feedback

Thanks for your feedback

We'll use your feedback to keep improving our help articles